iSNATCH 67.4293.55, Руководство пользователя

Страница: 23 / 35

23
Warnings
1. Insert the SD card correctly; the camera does not support hot insertion. In
other words, ALWAYS turn off the camera before inserting or removing the
memory card.
2. Always use good quality Stilo batteries in order to prevent corrosion or loss of
acid. Do not reverse the polarity of the batteries during insertion.
3. To power the camera, you can use a power supply (6VDC / 1.5A).
4. Do not interrupt the power supply during the firmware update.
5. Always set the switch to OFF before: switching on / off SD card and batteries,
switch on / off the external 6VDC adapter.
6. The presence of floating objects (eg leaves, branches) present in the
acquisition areas of the camera, could start recording unwanted photos and
videos, due to the Motion Detection function active on the camera itself.
7. Do not install the camera near heat sources or ventilation slots in air
conditioning systems. Avoid direct sunlight. Placements that do not conform to
the operating logic, cause unwanted registrations to start.
Control Panel
Move the ignition switch to OFF to TEST. The
monitor turns on.
Pressing the
 button activates Video Recording
mode.
Pressing the SHOT button starts and stops
recording a movie on SD.
Pressing the

button activates the Camera / Picture Capture mode.
Pressing the SHOT button takes a picture and saves it on SD.
Pressing Replay

starts playback of files recorded on SD.
Use the

keys to select the file to be played. Press OK to start video playback.
Press the Replay

button again to exit playback.
Pressing the Menu button, accesses or exits the settings menu.
Use the
 keys to navigate in the menu.
Pressing OK confirms the selection of the parameter.