Ismart X7 HD+, Руководство пользователя

Страница: 14 / 33

14
Installation
1.5 Motor Configuration
To set up the auto Satellite Dish
(DiSEqC1.2 system) and generate the
positioner system.
Continuously Move
Using the ”Vol” buttons to adjust West and
East to move the dish, the bar of signal and
quality at the bottom of the screen judge
the best position of the dish.
Step Size
Adjust the Move Step from 1 to 10.
Move steps
Dish move step by step, adjust the dish to the best position.
Limit set
Using the ”Vol” buttons to fix East or West limit or disable limit status.
1.6 USALS Setup
To set up the USALS system onto your
STB.
If you have a USALS motorized system,
you must set your position (latitude and
longitude) in order to calculate all motor
positions for viewable satellites. You should
refer to the motor’s manual to get.
Set the correct value of Longitude and Latitude of your position, press OK key,
then you can see the moving direction and angle to your selected satellite from
Motor menu.