iSMA CONTROLLI SfAR-S-6TI, Руководство пользователя

Страница: 12 / 26

SfAR-S-6TI User Manual
www.ismacontrolli.com DMP272en | 3rd Issue rev. 2 | 05/2022 page 12 of 26
•
•
•
turn the DIP switch SW6 on;
turn the power on;
when power and communication LED is lit, turn the switch SW6 off.
4.7 Configuration Registers
Modbus Address Decimal Address Hex Address Name Values
40003 2 0x02 Baud Rate 0 – 2400
1 – 4800
2 – 9600
3 – 19200
4 – 38400
5 – 57600
6 – 115200
other – value * 10
40005 4 0x04 Parity 0 – none
1 – odd
2 – even
3 – always 0
4 – always
40004 3 0x03 Stop Bits 1 – one stop bit
2 – two stop bits
40004 3 0x03 Data Bits 7 – 7 data bits
8 – 8 data bits
40006 5 0x05 Response Delay Time in ms
40007 6 0x06 Modbus Mode 0 – RTU
1 – ASCII
Table 6. Configuration registers
Warning!
After restoring the default configuration, all values stored in the registers will be
cleared as well.