MAINTENANCE
PERIODIC CONTROLS
The rolls of the machine must
NEVER
be greased or lubricated. Because, then the rolls will slip
the material and will not bend. Always keep the rolls clean and free from grease or any lubricant. AIso
make sure that the material is free from grease and dirt.
These points must be greased periodically at least once a month or more if daily usage exceeds 8
hours a day. Note that some of these points are actually inside the machine cover and the front cover
must be removed in order to reach them. Any standard commercial grease can be used for lubrication.
NUMBER
PERIOD
WHAT TO DO
1- Gear system
Once a month
Grease
2- Gearbox
Once a year
Oil
REDUCTION GEARBOX MAINTENANCE
The reduction gearbox of the machine is inside the front cover and is maintenance free. Only you
should control it periodically and tighten the bolts fixing it to motor and to the frame, if necessary.
LUBRICATION PLAN
For efficient working with the machine the above marked ( 1 and 2 ) parts must be greased at
least once a week. Also the ( x ) marked lubrication pump oil level must be controlled and re-filled if
necessary. We recommend Mobil Vectra 2.
The lever on this pump should be pulled up once and it will go down slowly by itself to lubricate.
Then it must be pulled up again.
