iSimple Media Gateway
PXAMG DOs of Installation
DO: Thoroughly Read the Owner’s Manual
The Media Gateway is simple to use when you have a clear understanding of how the
interface should operate.
DO: Turn All Dip-Switches OFF unless otherwise instructed by the owners manual
As of 9/01/08 there are only 3 types of vehicles that require dipswitch settings:
•
Ford Lincoln/Mercury (only needed for AUX or troubleshooting; see owners
manual)
•
Volkswagen (see owners manual)
•
Nissan (see owners manual)
DO: Understand that the Media Gateway Imitates the Factory Satellite Radio
Tuner
Access to all Media Gateway functions are through the “Sat Mode” of the respective
factory radio
DO: Use Radio Function Quick Reference Cards
Inside each kit are Radio Function Quick Reference Cards that illustrate what buttons
perform specific functions on the various radios. We recommend using these cards when
demonstrating the product with the customer after installation.
DO: Wait One Minute if “DEV INIT” is Displayed on the Radio
Wait one minute and then cycle ignition off then back on. Now enter the Satellite radio
mode to access the Media Gateway.
DO: Connect Cables to the Correct Ports
Connect the iPod docking cable in the port on the left (furthest away from the
dipswitches) and the HDRT cable or Aux audio input cable into the port on the right
(closest to the dipswitches)
DO: Reset iPod if Text on Radio is not in Sync with Music
If the Text displayed on the screen does not match what is playing from the iPod, or there
are intermittent control issues, please reboot the iPod. Do this by carefully disconnecting
the iPod from the docking cable, press and hold the “Menu” button, and the button in the
center of the “Click wheel” simultaneously for 10 seconds.
NOTE: This is similar to rebooting your computer and it resolves internal
communication issues within the iPod. No music will be lost by doing this.
