2
ISIMET
RLA Series Utility Controller
Installation, Maintenance, Operations, and Startup Instructions
Copyright © 2015
ISIMET/MAPA, LLC
.
ISIMET
is a trademark of
ISIMET/MAPA, LLC,
an affiliate of
WCM Industries
, Inc.
All rights reserved.
Patent 6,757,589 B1, 6,990,393 B2
This document is copyrighted. This document may not, in whole or part, be copied, duplicated, reproduced, translated,
electronically stored, or reduced to machine readable form without prior written consent from
ISIMET
.
Although the material contained herein has been carefully reviewed,
ISIMET
does not warrant it to be free of errors or
omissions.
ISIMET
reserves the right to make corrections, updates, revisions, or changes to the information contained
herein
.
Warranty:
ISIMET will repair or replace any defective parts or workmanship of this product for a period of one year from date
of installation. The Primary Operating P.C. Board has a two year limited warranty.
Damage caused by incorrect
installation or improper usage is not warranted. Failure to follow recommended installation, operation, and/or
maintenance procedures listed in this manual may void product warranty. Recovery rights shall be limited to the
total sum of the amounts paid for the product by the purchaser.
Limits of Liability:
ISIMET's liability shall be limited to costs of repair or replacement parts. The Laboratory Service Panel and Utility
Controller are not intended for usage other than those expressly described in this manual. ISIMET shall not be liable
for damage or injury caused by the improper use of the product.
ISIMET does not warrant against or assume liability for failure of operation or lack of notification to secondary
integrated monitoring systems. The system should be thoroughly tested and adjustments made at time of initial
operation. Periodic testing should be conducted by the user to assure that all components function and operate
according to specifications.
Care should be taken in the installation of this product. ISIMET shall not be liable for damage or injury caused from
the improper installation of the product.
Warranty is Subject to Compliance with Specific Installation Requirements.
EXTENDED WARRANTY:
ISIMET will extend the warranty period of the products when installation complies with all start up procedures and that a factory
authorized agent either performs or is in attendance during start-up of the system(s). Controllers, Companion and Accessory
Panels will be extended to a period of five years from date of installation. Except for ISIMET FLA, DLA, RLA and other Units
where automation systems are not common, Control System(s) must be interfaced with a building automation system or other
ISIMET approved time sequencing control for “non-use” system shutdown. All operating components of the system must be
ISIMET provided. Prescribed routine maintenance procedures must be performed per ISIMET recommendations.
All Start-up and Routine Maintenance Documentation shall be per Factory Recommendation.
Further, required start-up and maintenance procedures must be performed as directed upon all affected systems. This warranty
shall only become enforceable upon issuance of application specific Extended Warranty Document. A copy of this document
should be maintained at all times at the location of the warranted systems.
DISCLAIMER OF IMPLIED WARRANTY:
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION HEREIN. SELLER
DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OF THE GOODS OR OF THE FITNESS
OF THE GOODS FOR ANY PURPOSE, AND BUYER AGREES THAT THE GOODS ARE SOLD “AS IS.”
NOTE: Only qualified craftsmen licensed within the governing jurisdiction to perform the work associated with this
installation should install and/or service this equipment.
Printed in the United States
