4
DuraPANEL front panel controls (ECDIS and
Radar)
The front panel controls are illuminated and will be dimmed continuously depending on
changing of backlight brightness.
4.1
DuraPANEL front:
STATUS:
This LED will illuminate green when the monitor is powered on and red when the monitor is
powered down. The LED will blink green if no active signal is found.
ECDIS:
When calibrated this LED will illuminate when backlight level is at calibrated setting.
BRILL:
Used to adjust backlight. Pressing UP and DOWN at the same time will restore the backlight
level to the last selected ECDIS mode (day, dusk or night) by the serial link.
PWR:
This key is used to turn the product on or off. Pressing it will turn the power on, while holding
it pressed for 5 seconds will turn the power off. The status light will change from green to red
to indicate it’s powered down.
ECDIS LED
STATUS LED
UP
DOWN
POWER
User Reference Manual – DuraPANEL series
PN: 07354-000 Rev A Page 7
