OSD
Language:
Use to change the OSD language.
Default: English
H Position:
Use to adjust the position of the OSD menu
left or right. Increase the value to move the
OSD right. Decrease the value to move the
OSD left.
Default value = 50
V Position:
Use to adjust the position of the OSD menu
up or down. Increase the value to move
the OSD up. Decrease the value to move
the OSD down.
Default value = 50
Transparency:
Use to adjust the transparency of the OSD
menu. Decreasing the value will make the
OSD more transparent. Increasing the
value will make the OSD more solid.
Default value = 33
OSD Time:
Use to select how long time the OSD menu
will be displayed. When no actions have
been carried out in the specified time, the
OSD menu will be removed.
Default value = 10 seconds
SETUP
Source:
Use to change the active source. Selecting
AUTO will scan for an active signal. If both
VGA and DVI signal are found, DVI will be
preferred.
Default = Auto
Factory Reset:
Use to restore all settings to the default
values. By activating this function, all
settings made by the user will be lost and
the monitor will be brought back to known
operating conditions.
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 9