Clock (VGA only):
Use to adjust the frequency of the clock
signal.
Default value = 50
Phase (VGA only):
Use to adjust the clock phase. Adjusting
this value will remove shadows in the
picture.
Default value = Auto detected
COLOR
Color Status Management
Use to adjust the color temperature of the
picture.
Default value = User
Red (VGA only):
Use to adjust the Red gain. Increase the
value to make the picture more reddish.
Decrease to make it less reddish.
Default = 50
Green (VGA only):
Use to adjust the Green gain. Increase the
value to make the picture more greenish.
Decrease to make it less greenish.
Default = 50
Blue (VGA only):
Use to adjust the Blue gain. Increase the
value to make the picture more bluish.
Decrease to make it less bluish.
Default = 50
Auto Color (VGA only):
Use to auto adjust the ADC values for Red,
Green and Blue.
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 8