ITA Series – Table Top Precision Weighing Balance
ITA Series – Table Top Precision Weighing Balance
5.3 ZERO OPERATION
Center of Zero is indicated by the
annunciator . You can press
the ZERO/ENTER key to set the zero
8
5
point from which all other weighing and counting is measured. The zero will
function within 5% of the internal zero setting. The scale has an automatic
auto-zeroing function to account for minor drifting or accumulation of
material on the platform. This auto-zero range can be configured in the user
setup. However you may need to press the ZERO/ENTER key to rezero the
scale if small amounts of weight are shown when the platform is empty.
5.4 MODE button
5.4.1 COUNTING FUNCTION :
When the scale is displaying
0.000, press this button
twice, the display will show
“C 0” which is the number
of pieces. You can select
between values of 10, 20,
50, 100, 200, 300, 400, 500,
1000 using the Tare button
which are sample pieces.
Once the number of pieces
is displayed, keep the same
number of pieces on the weighing pan and press the Zero button.
The weight of the pieces kept on the weighing pan is displayed as the
number of pieces selected. Simply press the Mode button once, if the
user wants to exit the counting function to come in to the weighing
mode.
It is important to know that SLEEP mode increases the battery back-up time by
double. The Normal backup time when the sleep mode is switched off is 30
Hours, and with the SLEEP mode switched on, the battery back-up time
increases to more than 60 Hrs. If the USER wants to
switch off
the SLEEP
MODE for some special usage or function it can be done as follows: When the
scale is in the weighing mode, Press ZERO and TARE button together. The
display will show “P-TARE” Now press the ENTER button eight (8) times so that
the display shows “SLEEP1”. 1 means the sleep mode is currently switched On. If
the user wants to switch the sleep mode Off, press the TARE button once. The
display will now show “SLEEP0”. Now press the ZERO button till scale comes to
the weighing mode. Now the Sleep mode has been switched off.
6.5
LOCK MODE :
By selecting
the Lock as “ 1 “ you can lock
the MODE key that is the
mode key will not work which
can be done as follows. When
scale is in the weighing mode
with no weight on the pan,
while pressing the ZERO
button press the TARE
button, display will show “P-
Tare”. Now press the Zero button nine (9) times so that the display shows
“Loc 0” to enable this function that is to lock the Mode key press the Tare
button once and the display shows “Loc 1” now press the Zero button to
come back in the weighing mode. The Mode key has been locked and
will not work.
