ISHIDA WM-NANO, Руководство пользователя

Страница: 11 / 36

11
Cutting power to the machine
General Notice: In order to use the machine safely, refer to the general points explained below
- For safety, please shut down the power before performing maintenance on the machine.
- Please be careful because even when the switch is turned to the "OFF" position, there is still electric power inside the machine.
- In order to prevent other persons from starting up the machine during the service work, the following steps are recommended.
Lock up the power switch at the “OFF” position.
Make a tag for preventing an accident, and place it at the power switch.
- Refer to the images below when you place the lock and the tag.
Caution
- Operators of the machine with long hair have to bind his/her hair up, wear caps, and wear proper clothes and shoes for the operation.
Long hair and loose clothes may get caught in the machine causing accidents and harming the operators.
- Please make sure that all covers are properly attached before operating the machine.
- Please perform maintenance after turning off the machine unless it is necessary to keep the machine on.
- When you perform maintenance of the machine, please start it some time after you turn off the machine. There is a part that is hot even when the power
source is cut off.
Also, when there are any other interlocking machines before or behind the machine, please turn off all other machines, too.
- Persons who maintain the machine should advise that the machine is under maintenance in order to prevent someone from turning on
the machine accidentally or move the machie.
Warning
- Please do not touch switches or buttons with a wet hand. When the earth ground is not working properly, you may get an electric shock.
- Please let electrical contractors or a person with an electrical engineering license perform electrical work.
- Please do not touch the current-carrying part of the machine. You may get an electric shock.
- Maintenance should be done by responsible persons for electric maintenance. Unqualified persons may experience electric shock or damage the
machine.
Attention
- Please do not operate the machine with loose tools on the machine. They may fall down into moving parts and damage the machine.
- When maintaining the machine, please wear coveralls. Also, please avoid wearing cotton work gloves.
- Please do not touch the machine, films, trays and lables with dirty hands with foods. It can cause microbial contamination.
Please prepare the tag and the
lock at the customer’s side.
No. Name
①
②
③
Main power swich
Lock
Tag