ISHIDA Omni-4000ST Скачать руководство пользователя страница 26

Страница: 26 / 135

Chapter 1 BEFORE USING THIS MACHINE

1.9 DAILY MAINTENANCE

Daily maintenance is vital to prolong machine use and to avoid trouble or failure. Keep the machine
clean every day after work.

The following precautions should be observed before cleaning this machine.

•

Make sure to turn OFF the Main Power Switch while cleaning the machine.

•

Some parts of the machine still remain hot although the Main Power Switch has been
turned OFF.

•

A person cleaning this machine should keep all long hair up, wear a hat, appropriate
clothing and shoes.

•

Make sure to wash hands and wear clean gloves before cleaning the machine.

•

Wet the cleaning cloth with a mild detergent and wring it thoroughly before use.

•

Spray alcohol (80% vol.) on the areas in direct contact with food or trays for sterilization

•

A numeric key cover may be a good solution if the numeric keys get heavily soiled.

•

Do not apply water directly as it can damage the machine.

•

Lubricating each drive unit is not necessary.

1.9.1 MACHINE

CLEANING

Press the [

] button on the

screen.

Press the [PREPARE CLEAN]
button on the screen.

page 1-16

Omni-4000ST User’s Manual

Содержание Omni-4000ST








































































































































Результаты поиска

Содержание Omni-4000ST

Отзывы:

Похожие инструкции для Omni-4000ST

Бренды по названию

Популярные бренды

ISHIDA Omni-4000ST, Руководство пользователя

Результаты поиска

Содержание Omni-4000ST

Отзывы:

Похожие инструкции для Omni-4000ST

Бренды по названию

Популярные бренды