ISHIDA IL-EMZ, Руководство по обслуживанию

Страница: 65 / 146

Chapter 3 TEST MENU
IL-EMZ Service Manual 3-13
MEMORY INITIALIZE
Touch the [EXECUTE] button to initialize the following five
settings:
x
Automatic setting of head resistance
x
Head type (Set it to 0: LH4114.)
x
Head usage distance (Set it to “0.0” km.)
x
Initialization of the label sensor level
x
Initialization of the peel sensor level
HEAD STATUS CHECK Touch the [EXECUTE] button to check for a head failure.
The following causes are assumed when an error is displayed.
(1) Thermal head failure
(2) Defect of the P-964 board
(3) Defect of the harness “C2” thermal head (091-8799-01)
CASSETTE STATUS At the time of cassette insertion:
z
At the time of a cassette drawer:
c
ROLLER It is not used.
LABEL SENSOR
LEVEL
Displays label sensor level.
Press this button to finely adjust the label sensor level (display field
will change to green) and press the (
UV
) adjustment buttons.
Press this button again to change the display to white and set
adjustment data. The level range is 0-255.
PEEL SENSOR LEVEL
Displays peel sensor level.
Touch this button to finely adjust the peel sensor level (display field
will change to green) and press the (
) adjustment buttons.
Touch this button again to change the display to white and set
adjustment data. The level range is 0-255.
STANDARD
STANDARD button can perform change of the threshold value of
peel sensor.
Default: 90
PEEL SENSOR REFERENCE
Peel sensor is threshold Detection mode.
It is judged that the value below threshold has a label.
It is judged that the value exceeding threshold has no label.
Threshold value can be adjusted.