ISHIDA BC-4000 Скачать руководство пользователя страница 96

Страница: 96 / 142

Chapter 3 TEST MODE

3-10

BC-4000 Service Manual No. 085-6693-02

3.4

C03 THERMAL HEAD

Operation

Press the [

] key repeatedly until C03 menu appears, or key in “3” and press the [

] key to enter C03

menu directly.

yyy

3 PRINT HEAD [ENTER]
C03

3.4.1

C03-01 Thermal Head Resistance

Operation

Press the [ENTER] key to enter C03-01 menu.

The thermal head resistance can be set.

Note: The resistance must be set after the thermal head is replaced.

RESISTANCE (960)

C03-01

2. Press the [COPY] key to read the ID from the thermal head and set it automatically, or key in the

resistance described on the head and press the [ENTER] key to save it in E2ROM.

3.4.2

C03-02 Print Usage Distance

Operation

1. Press the [

] key to enter C03-02 menu.

Total print distance of the thermal head can be confirmed.

It is displayed in 100m (0.1Km) units and stored.

PRINT USAGE ( 0.0 km)

C03-02

2. To reset the distance, key in the password “495344” and press the [SIZE] key.

3. Key in the desired usage distance and press the [ENTER] key.

Содержание BC-4000















































































































































Результаты поиска

Содержание BC-4000

Отзывы:

ISHIDA BC-4000, Руководство по обслуживанию, Страница: 96 / 142

Результаты поиска

Содержание BC-4000

Отзывы: