ISHIDA BC-4000, Руководство по обслуживанию

Страница: 88 / 142

Chapter 3 TEST MODE
3-2 BC-4000 Service Manual No. 085-6693-02
3.2 C01 HARDWARE TEST
Operation
Press the [
¾
] key to enter C01 menu.
1 HARDWARE TEST [ENTER]
C01
3.2.1 C01-01 A/D Check
Operation
Press the [ENTER] key to enter C01-01 menu.
1. A/D CHECK [ENTER]
C01-01
3.2.1.1 C01-01-00 Zero Point & Span Adjustment
Operation
1. Press the [ENTER] key to enter C01-01-00 menu. The original A/D data appears.
ZERO=[ZERO]:SPAN=[TARE]
C01-01-00 20008 20008
2. Press the [ZERO] key to make the A/D initial value “20000”.
Note: “2000” is a data output from the A/D board, and “0” denotes that “2000” are regarded as zero
point.
ZERO=[ZERO]:SPAN=[TARE]
C01-01-00 20000 0
3. After a zero point adjustment, place the same weight as the maximum weighing capacity on the
weigh platter and press the [TARE] key to execute the span adjustment automatically.
¨
ZERO=[ZERO]:SPAN=[TARE]
C01-01-00 95000 75000