manualshive.com logo in svg

ISHIDA 185822, Инструкции по эксплуатации

Поделиться
Скачать
ISHIDA 185822 Скачать руководство пользователя страница 5

Introduction

© Rice Lake Weighing Systems 

●

 All Rights Reserved

1

1.0

Introduction

This manual is intended to remain with the Astra II price computing scale once installation and configuration are complete.

Manuals are available for viewing and/or downloading from the Rice Lake Weighing Systems website at 

www.ricelake.com/manuals

Warranty information can be found on the website at 

www.ricelake.com/warranties

1.1

Safety

Safety Signal Definitions:

Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Includes 

hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death. Includes 

hazards that are exposed when guards are removed.

  Indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury.

Indicates information about procedures that, if not observed, could result in damage to equipment or corruption 

to and loss of data.

General Safety

Do not operate or work on this equipment unless this manual has been read and all instructions are understood. 

Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Rice Lake 

Weighing Systems dealer for replacement manuals. 

Failure to heed could result in serious injury or death.

Do not allow minors (children) or inexperienced persons to operate this unit.
Do not operate without all shields and guards in place.
Do not use for purposes other than weight taking.
Do not place fingers into slots or possible pinch points.
Do not use any load-bearing component that is worn beyond five percent of the original dimension.
Do not use this product if any of the components are cracked.
Do not exceed the rated load limit of the unit.
Do not make alterations or modifications to the unit.
Do not remove or obscure warning labels.
Before opening the unit, ensure the power cord is disconnected from the outlet. 
Do not allow water or any liquids to come into contact with the scale.
Do not drop or apply shock to the scale.
Do not disassemble, modify or attempt to repair the scale. 
Do not hold the connector cover when carrying the scale. 
Do not hold the operation panel or weigh platter when carrying the scale.
Do not hold the customer display when carrying the scale.
Dispose of batteries according to local regulations.
Handle with care when removing or inserting the cassette.

DANGER

WARNING

CAUTION

IMPORTANT

WARNING

Содержание 185822







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды