ISGM LP-700, Руководство пользователя, Страница: 8 / 20

8
The maximum number of LP-700 pixels in a controllable daisy chain is 168 (on a single DMX universe). Additional LED
Pixels can be controlled in an installation using multiple DMX universes and separate daisy chains, each chain with its
own Power Injector and up to 168 pixels. Each pixel uses three DMX control channels, and the maximum number of
channels in a DMX universe is 512 (3 x 168=504 channels). Use only IP65-rated connectors for outdoor installations.
Power supply unit
The LP-700 power supply unit (transformer) can operate on any 100–240 V, 50/60
Hz AC mains power supply and supplies 18 V DC to LP-700 LED Pixels via an
Injector (for the first power supply in a daisy chain of LED Pixels - P/N 83062007)
or power injector (for subsequent booster power supplies in a daisy chain of LED
Pixels - P/N 83062008). Splicing or connecting a power supply unit to mains supply,
or to an injector or power injector, must carried out by a qualified electrician.
Power supply units must be grounded/earthed and be able to be isolated from
AC power. The AC power supply must incorporate a fuse or circuit breaker for fault
protection.
Do not open a power supply unit to replace the supplied power cable, or connect the
device to an electrical dimmer system, as this can damage it.
Injector (power & DMX)
Power Injector
(power & DMX-through)