28
Product Version 1.0 | Revision A | Released 2022-2-21
Standalone operation is not running when the fixture is connected to a
control device, but when it is pre-programmed with a series of up to 24
scenes, playing continuously in a loop. Up to three stand-alone programs
can be defined and run from the menus, and one of the programs can
be set to run by default whenever the fixture is powered on.
Each of the three available standalone programs contains 24 user-defin
-
able scenes with its own RGB and shutter settings.
Each scene has a definable fade-in time for the transition from one color
to the next, and a wait (static) time of up to 120 minutes and 59 seconds.
To define a stand-alone program, press ENTER → MANUAL → EDITOR.
The standalone mode of the fixture’s startup is enabled by selecting:
ENTER → SETTINGS → STARTUP MODE → SELECT STARTUP MODE →
STANDALONE.
To select the fixture’s startup program, press:
ENTER → SETTINGS → STARTUP MODE → STARTUP PROGRAM.
The chosen program will run its length cyclically whenever the fixture is powered on.
To run an internal program, go to:
•
ENTER → MANUAL → RUN PROGRAM.
To stop an active internal program, go to:
•
ENTER → MANUAL → STOP PROGRAM.
See “Control menu” on page 27 for detailed information about the manual menu.
PLEASE NOTE! IN POI VERSIONS, CONFIGURING THE FIXTURES IS DONE THROUGH RDM.
Figure 21: Standalone operation
USING STANDALONE OPERATION