Copyright, 2004 Imaging Solutions Group
of NY
, Inc., All Rights Reserved
Revision 2.1 Subject to change without notice.
19 of 33
STRBM :
Strobe Mode. These bits control the functionality of the Strobe output to the
illumination system.
STRBM[1:0] = 00 : Active high (Activated by trigger).
STRBM[1:0] = 01 : Active Low (Activated by trigger).
STRBM[1:0] = 10 : Always high (Not activated by trigger).
STRBM[1:0] = 11 : Always low (Not activated by trigger).
HTRIG :
Host trigger bit. Asserted via 1394 interface.
VIDEN :
Video Enable bit. This bit is set after imager is initialized.
TRGSNS: Trigger
Sense
IMRST:
Imager Reset, Controls the SS_RESET pin on IBIS Sensor
OUTFMT:
Output Format. These bits control the output data format.
OUTFMT[3:0] = 0000 : 8 bit data output. (default)
OUTFMT[3:0] = 0001 : 10 bit data output in 16 bit field with LSB’s padded with
0.
OUTFMT[3:0] = 0010 : 10 bit data output in 16 bit field with MSB’s padded
with 0.
OUTFMT[3:0] = 0100 : Test pattern Enable
OUTFMT[3:0] = 1000 : 10 bit data. No padding.
LUTEN:
Look up Table Enable. Set this bit to ‘1’ to enable 10 bit to 10 bit data mapping
via programmable look up table. Reset this bit to ‘0’ to bypass look up table.
Address : 0x404 (STAT)
Data format : B1
Default Value: 00h
7 6 5 4 3 2 1 0
not used
TSTAT
TSTAT :
Trigger Status. This read only bit is high when local trigger is asserted.
Содержание LW-3-S-1394
Страница 32: ......