5
d. Replace the cover of your computer.
e. Connect the CameraLink
TM
cable to the ISG Imager
Modules Video Connector, J3, and the ISG Image
Grabber connector “A”
f. Turn on your computer.
In some cases, when you boot your computer, Windows’
Plug-and-Play system will detect a new PCI card and you
will be asked to assign a driver to it. At this point, you
should click on
Cancel
because the driver will be installed
during the installation of the ISG Image Grabber software.
Software Installation
Please refer to the Software Installation Guide for detailed information.
PCI 5V slot
CameraLink
TM
“A”
connector
CameraLink
TM
“B”
connector
Red LED
“Line Active”
Green LED “FPGA OK”
Copyright 2003 Imaging Solutions Group of New York, Inc., All Rights Reserved
Subject to Change Without Notice
