7
Cleaning
For cleaning the EuroScooter DO NOT USE a high pressure cleaner, a steam cleaner or a water hose to clean the scooter. Always use a light
moist but never soppy towel. Do not use aggressive cleaning agents, because they may attack the surface of the material. The wheels can be
cleaned with a damp brush with plastic bristles (do not use a wire brush).
Inspection Maintenance
Every 3 months or after 200 hours of operation, your EuroScooter must be inspected. Check the brakes, lights, wheels and tread depth of tires
(min. 1mm / 0,04 inch). Worn tires or defective parts must be replaced. Also check the function of the parking brake. With a tightening
parking brake the scooter with the driver should not move.
Lubricant specification
Please clean and maintain the bearings on a 3 month basis. Use only special grease or Teflon spray. This is the only way to ensure that the
bearings run and remain water resistant and will not rust. Wipe off excess grease with a soft, lint-free cloth. Other parts may not be treated
with a lubricant.
Brake System
The hydraulic disc brake ensure a safe and uniform braking behavior and uniform brake pad wear. Brake pads should checked all 3 month
and be replaced with new ones, if frictional material thickness is reduced to 1 mm or if brake pads on the same axle do not wear at the same
rate. Should the closed oil system however start leaking or lose its pressure point on the brake, then it is necessary to maintain the system.
The brake system is not intended for customer servicing. For this purpose, please send the system to isel.
Maintenance instructions
We recommend that the Euro Scooter should be inspected at least once a year by an isel professional. In case of failures, malfunctions or
defaults of the scooter, immediately contact the isel Customer service or bring the scooter to a isel service point. The replacement, repair of
damaged or broken parts that concern the frame, fork, lights, brakes or drive must always be performed by isel professionals. even if you
want to replace parts by your self , you are responsible for any damages or injuries caused by incorrectly fitted parts. Only original isel parts
must be used as spare parts!
Disposal of the scooter
If you wish to dispose the scooter, contact a isel dealer or contact local disposal companies for the disposal regulations of your area.
Transfer and sale to a new owner
If you transfer your Euro Scooter a new owner, it is important that you provide all the necessary technical documentation or information to
the new owner.
Warranty
This warranty covers all defects of the EuroScooter that are shown to be caused by material or production defects. For the Euro Scooter, we
offer a 5 year warranty on the frame and the front fork against breaking whilst being used correctly. For the powder coating, accessories and
spare parts is a 2 years guaranteed only to the extent of defects in material error or faulty execution are attributed.
Warning!
Non-compliance of the instruction manual as well as servicing not being carried out in the proper manner as prescribed by the instructions
manual, technical modifications and additional fittings without approval of isel all will result in expiration of both the warranty and the
product liability in general.
Содержание EuroScooter
Страница 1: ...1 EuroScooter OWNER S MANUAL ...
