manualshive.com logo in svg

Iseki TXG23, Руководство пользователя, Страница: 14 / 81

Поделиться
Скачать
Iseki TXG23 Скачать руководство пользователя страница 14

14

TXG23

(1) Fan warning label (Code No.1705-902-006-0)

WARNING: RISK OF ENTANGLEMENT
Stay clear of the fan while it is turning

(2) Battery disconnecting label

(Code No. 1636-901-022-00)

WARNING: RISK OF ELECTRIC SHOCK
When disconnecting the battery, detach the nega-
tive terminal first and attach the positive terminal
first when connecting the battery.

(3) Belt warning label (Code No.1674-904-008-0)

WARNING: RISK OF ENTANGLEMENT
Stay clear of the belt while it is running

(4) Hot part warning label

(Code No.8595-901-007-00)

WARNING: HOT SURFACES, RISK OF 
BURNS ON HANDS AND FINGRS
Stay clear of the heated parts until they cool 
down sufficiently.

(5) Ether label (Code No.1674-904-002-1)

WARNING: RISK OF EXPLOSION
Ether or other starting fluid should never be used
to start engines equipped with glow plugs.

(6) PTO label (Code No.8654-901-002-0)

WARNING: RISK OF ENTANGLEMENT
Stay clear of the PTO shaft while the engine is
running.

(7) Trailer label (Code No.1674-904-004-0)

WARNING: RISK OF OVERTURNING
The rear implement should be installed on the tr-
actor with an approved drawbar or by using the
lower links of the three point hitch.
Use only an implement of proper loading capaci-
ty and weight not exceeding the designed capabil-
ity of the tractor.

Содержание TXG23


















































































Отзывы:

Нет отзывов