manualshive.com logo in svg

Iseki TH4260, Руководство оператора

Поделиться
Скачать
Iseki TH4260 Скачать руководство пользователя страница 59

LUBRICATION & PERIODIC MAINTENANCE

59

LUBRICATION DETAILS

Grease Fittings

Lubricate all grease fittings (refer to Fig. 6-1 & 6-2) every
50 hours of operation using No.2 multipurpose lithium-
base grease. Clean the grease gun and fittings before
and after greasing to prevent contamination from dirt.

NOTE: When operating in muddy or extremely wet con-

ditions, daily lubrication of fittings is recom-
mended.

SERVICE ACCESS

CAUTION: Shut off engine before servicing
Tractor. Engine hood side panels and front
grille must be Installed and secured prior to
operating unit.

To access radiator, battery and engine components, top
of engine bonnet can be opened, both hood side panels
and front grill can be easily removed.

FIGS. 6-3 & 6-4: To open; turn locking knob, 1, one-
quarter turn clockwise on top of engine bonnet, pull
upward the bonnet and lock it by retaining stay, 2.

Reinstall in reverse order, engine bonnet will be nec-

essary to push inward on locks, 1, and then turn one-
quarter turn counterclockwise to secure.

FIG. 6-5:
To remove side panels; turn red levers, 3, and then lift
up side panel upward to disengage and remove.

Reinstall in reverse order making sure top edge of side
panel engages correctly. Push inward on bottom edge
and turn levers, 3, to lock.

FIG. 6-3

FIG. 6-4

FIG. 6-5

Содержание TH4260

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды