Iseki SXG19H-UE, Руководство по эксплуатации

Страница: 69 / 96

SCMA54&SCMA48
70
1. BEFORE OPERATION
Caution:
• Become familiar with haw to operate the lawn
mower and understand safety instructions by read-
ing this manual carefully.
• Make sure that all safety covers and guards are
installed in position.
• Make sure that the blade nuts are tightened
securely.
• Make sure that the belt is tensioned evenly as
specified.
• Before moving the lawn mower into the working
site, check the whole area and get rid of all obsta-
cles such as stones, wood, empty tins, bottles,
wires, etc to assure safe operation.
• Make sure that the mower operation will not
cause any injury to children, animals, bystanders,
or damage to trees, buildings, etc.
• Check the place to mow for bumps, ditches,
mounds, steps, slopes, inclination, softness, water
pools, etc. ahead of time to avoid accidents such
as turnover, fall, side-sliding of the lawn mower.
2. CUTTING HEIGHT ADJUSTMENT
(1) Spring clip pin
a. Start the engine and raise the mower deck by the
lift lever. Then stop the engine.
b. Select one of the setting holes to get the required
cutting height, insert the pin, and retain it with the
spring clip pin. The label showing the relation
ships between the setting holes and cutting
heights is stuck on the mower deck.
c. Also set the cutting height of the gauge wheels by
re-setting the setting hole for the setting pin with
the spring clip pin removed.
d. The right and left gauge wheels should be set to
the same cutting height.
e. Push down the (
d
) of the lift lever to lower the
mower deck.
Caution:
Before operating the lift lever, be seated in the
operator's seat and make sure of the safety con-
ditions when lowering the mower deck.
III. MOWER OPERATION