Iseki SCMA48F, Руководство по введению

Страница: 20 / 52

SFH220 & SFH240 FRONT MOWER SERVICE MANUAL
20
(1) PTO lever
(2) Lift lever
CAUTION :
・
PTO UP-STOP mechanism works only
while the PTO Iever is in the ON (
M
) posi-
tion.
・
Before starting to mow, make sure that
this mechanism works properly. Be sure
to detach the drive shaft before checking
the PTO UP-STOP mechanism.
・
The mechanism restricts to lift up the
mower deck excessively while the mower
blades are rotating.
・
When you want to lift up the mower deck
high, shift the PTO Iever to the OFF (
N
)
position. Never attempt to shift the PTO
Iever to the ON (
M
) position while the
mower deck is lift up high.
・
Before starting to mow, make sure that
the Iift cylinder is set properly.
・
Whenever you encounter with any trouble
of the front mower, ask your dealer for re-
pair immediately.
3. STARTING MOWING OPERATION
CAUTION :
・
Read the contents of this manual thor-
oughly and carefully and keep safe the
operation in mind.
・
Before moving the front mower into
the working site, investigate the whole
site and get rid of all obstacles such as
stones, wood, empty tins, bottles, wires,
etc for operation safety.
・
Investigate the site for pits, mounds,
steps, slope angles, ground softness, wa-
ter pools, etc to avoid turning over, falling
down, and side-shifting.
・
Also make sure there is no danger of hurt-
ing children, animals, by-standers, etc.
and damaging nearby trees, buildings,
etc. ogawa
a. Start the engine and turn the throttle lever to the
intermediate position between the low speed (
t
)
and high speed (
r
) positions.
b. Move the lift lever to the up position (
u
) to raise the
mower deck.
c.
Release the parking brake.
d. Push down the HST forward travel pedal gradually
to drive the front mower into the working site.
e. Release the HST pedal gradually to stop the front
mower.
f.
Move the lift lever to the down position (
d
) to lower
the mower on the ground.
g. Shift the blower PTO lever to the ON (
M
) position
(only for SFH 240 with collector).
h. Shift the PTO Iever to the ON (
M
) position.
IMPORTANT:
・
When engaging the PTO clutch, slow down the engine
speed sufficiently for safety.
・
The lift height and PTO Iever position are intercon-
nected for safety as follows:
- When the mower is lifted up higher than specified with
the PTO Iever shifted in the ON (
M
) position, the lever
is automatically shifted to the OFF (
N
) position.
- With the lift raised to the maximum height, the PTO
lever cannot be shifted to the ON (
M
) position. Never
attempt to move the lever forcibly, or the lever linkage
may be damaged.
1
2