Max input power limitation: if the input power fails to reach the max working power (330W), set this
parameter based on the actual output capacity of input power in order to protect it and enable the
charger to work stably. For example, as the power connected is 12V/10A, the value of this item should
be 120W.
Min input power: this item can protect the battery from excessive discharge since it’s used as input
power. If the charger tests that the input voltage is lower than the default value, all tasked in operation
would be terminated and there would be a warning of low voltage. For example, if a 6S Lipo battery is
used as the input power source, the value of the item should be 21V to protect the battery from
excessive discharge.
Buzzer volume: the default is OFF, the operation sound would be blocked, but not the sound of error
The battgo settings as below will be showed if connect the battgo smart battery:
Auto Storage
Storage Voltage
Charge Current
Charge Voltage
Exception Record
Back
When default set allow auto storage mode,
the time could be set between 12h-240h
set the storage voltage slightly,
adjustable range of voltages is -0.20V
change charge current slightly,
adjustable range of currents is between 0.1A to the max charging curren
change charge voltage slightly,adjustable range of voltages is -0.10v
Battgo smart battery will record the date include overvoltage,
undervoltage,overtemperature.
Back
15
Auto Storage
Storage Voltage
Charge Current
Charge Voltage
Exception Record
Back
240h
3.80V
2.6A
4.20V
...
BattGO Setting
