ESC70
有刷电子调速器用户指南
ESC70 Brushed Electronic Speed Controller
USER MANUAL
感谢您购买
ISDT ESC70
有刷电子调速器。
欢迎您登陆艾斯特官方网站
www.isdt.co
了解更多。
由于产品功能的不断更新，您手中的说明书可能会与实际操作有所出入。请以实际产品功能为准。
Thank you for purchasing ISDT ESC70 brushed electronic speed controller.
Welcome to visit the official website www.isdt.co to learn more.
Due to the continuous updating of product functions, The manual in your hand may differ from the actual operation. Please refer to the actual function of the product.
警告与安全提示
为确保您的安全和良好的用户体验，请在使用本产品前阅读本说明和警告。
1
．
电调与相关连接部件连接前，请确保所有电线和连接部件绝缘良好，短路将会毁坏电调；
2
．
使用此电调前，请认真查看各动力设备以及车架说明书，确保动力搭配合理，避免因错误的动力搭配导致电机超载，最终损坏电调；
3
．
若需对电调的输入输出线、插头做相关焊接时，为保证焊接牢靠，请使用至少
60W
功率的焊接设备进行焊接；
4
．
为了你和他人的安全考虑，请在车子悬空的情况下进行接线调试；
5
．
勿使电调外部温度超过 90℃/194℉，高温将会毁坏电调并且可能导致电机损坏；
6
．
使用完毕后，切记断开电池与电调的连接。如电池未断开，即使电调开关处于关闭状态，电调也会一直消耗电能，长时间连接电池最终会被完全放电，进而导致电池或
电调出现故障。
Warnings and safety tips
To ensure your safety and good user experience, please read this description and warning before using this product.
1. Before connecting the ESC to related connecting parts, please make sure that all wires and connecting parts are well insulated. Short-circuit will damage your ESC.
2. Before using this ESC, please carefully check the manual to ensure all your motor/battery and your RC within our recommended specifications that the power mix is reasonable,
and avoid the motor overload caused by the wrong power mix, poor connection and reverse polarity will damage your ESC.
3. If you need to solder your input and output cables or battery plugs of the ESC. Please use reliable soldering equipment with a power of at least 60W or above for soldering. If the
wire is too hot to hold, please remove the solder joint and let everything cool and try again. Excessive heat can damage your ESC.
Содержание ESC70
Страница 4: ...1 APP 2 THROTTLE BEC 3...
