www.modellmarkt24.ch; www.modellmarkt24.de
All product photos, statements and literature are for reference only. For up-to-date information, please visit our official web www.isdt.co
ISDT reserves the right of final explanation and revision for the terms.
System Setting Menu
Min. input voltage protection : 10-24V
all tasks in operation will be stopped at once and hint warning of low voltage, when the input voltage is lower
than the input voltage as set up. It will protect the battery from being discharged when using battery pack as
power supply. It’s not adjustable in AC mode.
Max. input power setting : 30-230W
In DC mode, if the input power is smaller than the max working power(230W), please set up the parameter as
the actual output power as max input, to protect the input power and enable the charger to work stable.
In DC mode, change the range to 30-230W. It’s not adjustable in AC mode.
Buzzer volume:
The operation sound will be shielded when the volume is off, except the warning error beep.
•
•
•
Under the standby interface, long press the shuttle key to enter the system setting menu :
GJSF!IB[BSE"
XBSOJOH"!
NEVER USE CHARGER UNSUPERVISED
• Never attempt to charge primary (non-rechargeable) batteries.
•
Batteries pose a severe risk of fire if not properly handled.
•
Read entire operation manual before using charger.
•
This unit may emit heat during use.
•
Only operate this device in a cool ventilated area away from flammable objects.
•
Failure to observe safety procedures may cause damages to property or injury.
www.modellmarkt24.ch; www.modellmarkt24.de
