ISC RP037, Общие инструкции по использованию

Страница: 7 / 44

7
PULLEY
Pulley Series: Issue E - Nov 2021
Český CS
[A] Pojmenování součástí
1. Hlavní upevňovací oko
2. Kolečko kladky / lanovnice
3. Značka nastavení ložiska (a) / objímky (b)
4. NFPA
5. EN12278
6. Maximální průměr lana
7. Sériové číslo
8. Kód součásti
9. Symbol uživatelské příručky
10. Označení CE
11. Nýt osy chráněný proti manipulaci
12. Minimální brzdná síla
[B] Péče a kontrola
U kladek by mělo být zkontrolováno, zda nejsou poškozeny jejich boční rámečky a la-
novnice. Lanovnice by se měly volně a hladce otáčet
[C] Použití
1. Kladku lze používat v ose směru tahu
2. Kladku zle použít pro přesměrování lana
the markings on the product are not legible. If repair or replacement of parts is required, it shall only be
carried out by the manufacturer or its recognised repair agent. Defective equipment should be destroyed
to ensure it is not used as safety equipment.
Lifespan
Please be aware that exposure to chemicals, extreme temperatures, sharp edges, major fall or load, etc.
can significantly reduce the lifetime of a product, to as little as a single use. The potential lifetime of ISC
products is up to 10 years for plastic or textile products, and indefinite for metal products. The actual
lifetime of a product depends on a variety of factors such as, the intensity of use, the frequency of use,
the environment in which it has been used (humidity, salt, sand, moisture, etc), the competency of the
user, and how well it has been maintained and stored etc.
Cleaning
The product may be cleaned regularly (or after every use in a marine environment) with a mild detergent.
Afterwards the product should be allowed to dry naturally. Moving parts may be oiled regularly with a light
oil. Make sure that lubricants do not come into contact with parts that rely on friction with rope and/or
with textile components.
Storage & Transportation
The product should be stored in a clean, dry environment free from corrosive or chemical substances and
away from all sources of direct heat. Care should be taken to protect the product against damage during
transportation.