ISC DW100.2, Руководство пользователя

Страница: 10 / 16

10
Deadweight
DW100.2: Issue A - Aug 2017
F Markings and Conformity
1
2
3
4
5
6
7
8
[F] Markings and Conformity
1. Meets EN795: 2012 Type E
2. PD CEN/TS 16415: 2013 – Recommendations for anchor devices for use by more than one
person simultaneously
3. Manufacturers Identification
4. Notified Body controlling the manufacture of PPE
5. Serial Number
6. Model Identification
7. Working Load Limit
8. 15kN (3372lbf) in accordance with IRATA ICoP and other leading industry guidance
[H] Thorough Inspection
1. The device should be periodically inspected by a competent person in line with local and current
legislation. The PPE discs located at the Anchor points [1] should also be replaced by the competent
person at the same time and marked with next inspection date
2. In the event of a dynamic event the device must be withdrawn from use and inspected. It should
not be put back into service until signed off by a competent person
3. If any irregularities are found, then parts may be replaced or the device should be removed from
use
- Dents or loss of section
- Missing weights
- Damaged eye bolts
- Damaged welds
[G] Pre-Use Inspection
1. Eyebolts: Ensure all eyebolts are securely attached
2. PPE Discs are present and in date
3. Weights: Ensure all weights are in place and secure
4. Sword Pins: Ensure all sword pins are in place and secure
5. Wheels: Ensure all wheels are secure, and functioning
[I] Care and Maintenance
1. The device is finished with a powder coating, this will chip over time so it is recommended that
any exposed metal is kept rust free and touched up with a weather resistant, metal paint. It is rec-
ommended that all working parts are lubricated on a periodic basis with a suitable lubricant such as
a light oil. It is recommended that the device is stored under cover at night and in the event that it
becomes wet, it is dried and stored in a well-ventilated area away from direct heat
2. The device should be stored in a clean, dry environment free from corrosive or chemical substanc-
es. Care should be taken to protect the device against damage during transportation
Serial No
MMYY/BBBB/XX
Model & Type/Identification
DW100.2
www.iscwales.com
WLL
200 KG / 440lbs
PD CEN/TS 16415-
MBS 15KN
EN795:2012 TYPE E
0120
Deadweight Trolley