ISANTA Senco SHLCN90, Руководство по эксплуатации

Страница: 4 / 33

Description SHLCN90
Order number
EM07200
Recommened fasteners
HL Ring coil BJ-, BL-,
HL-, HD-, GL- *****P
50-90mm
Magazine capacity
3000 Nails
Size H x L x W 453 x 687
x 179 mm
Weight
10kg
Noise
97,5 dB (A)
Air pressure useage
1260 l/min at 6bar
Air pressure hose
12 mm hose connection
via hose coupling
(subpackage)
Issue cycle
max. 7 Nails /second
Driving power Compressed air
Max. Air pressure 8,3 bar (120 psi)
Operating pressure
5-7 bar
4
GB
4
1 General
Please read these operating instructions carefully and thoroughly before using the high load tool for the first time. In
particular, observe the security advice in Chapter 2. These operating instructions must always be readily accessible to
every user.
1.1 Application
The Senco High Load Coilnailer SHLCN90 is an coilnailer with a magazine for high load coils.
It is used for permanent installation in equipment or production lines, e.g. in prefabricated houses (intended use). The
system is not an independent part and has to be connected with other parts to complete the whole as a machine. The
safety of all hazards must exclude the result from the management and operation of the system. The system clock cannot
be used for vertical movements. Lowering the positioning is possible.For security reasons please
use only staples stated in “Technical Data”.
1.2 Technical Data
GENERAL