ISA Isetta 12R LX, Руководство по эксплуатации и обслуживанию

Страница: 6 / 32

6
ISETTA
USE AND MAINTENANCE MANUAL
428000372 237
EN
2. SAFETY
The buyer is responsible for training personnel using the appliance on the risks, safety devices
and general health and safety rules required by the laws of the country where the equipment is
installed.
Users/operators should be aware of the position of all the controls and how they work, as well as
of the features of the equipment.
They should also read this manual in its entirely.
Maintenance work should be conducted by qualifi ed personnel after the equipment has been
prepared adequately.
Danger
Unauthorised tampering with or replacement of one or more parts of the equipment, the use of ac-
cessories that change its performance, and the use o spare parts other than those recommended
may cause the risk of injury.
Danger
Before doing any type of work, the equipment must always be disconnected from the power supply.
Any work on electric parts or cooling system components should only be carried out by
trained personnel in compliance with current laws.
2.1 Staff training
The buyer is responsible for ensuring personnel who will use the equipment and the
maintenance technical staff are instructed and trained adequately.
The manufacturer is available for advice, clarifi cations, etc. so that the operator and
technical staff can use the equipment correctly.
Attention
The equipment is designed for industrial use.
2.2 Safety devices applied
The appliance is equipped with the following safety devices:
2.2.1 SAFETY DEVICES INCLUDED
2.2.2 FIXED PROTECTIVE DEVICES
2.2.3 DISCONNECTING ELECTRICAL POWER SUPPLY
2.2.1 Safety devices included
Devices whose operation prevents risks from occurring when using the equipment (e.g.
fuses, pressure switches, protective devices, thermal switches, etc.).
2.2.2 Fixed protective devices
Fixed protective devices consist of fi xed perimeter shields, which are used to prevent
external parts from entering the equipment.
Danger
It is absolutely forbidden to restart the equipment after it has been serviced, without fi rst properly
restoring the panelling.
Attention
You should check the integrity of fi xed panels and corresponding fi xings to the frame, focusing in
particular on the protective panels.