27
GE
MY20
IT
2020-02
428001235037
Use and maintenance manual
16.
CLEANING
The materials listed below must be cleaned as follows:
STAINLESS STEEL
Only use warm water and non-aggressive detergents and then rinse.
ACRYLIC / POLYCARBONATE
Wash with lukewarm water, using a soft cloth or a chamois cloth.
CURVED GLASS
Only use products specifically designed for cleaning glass.
It is advisable not to use tap water which could leave limescale residues.
16.1
INTERNAL
ATTENTION
Do not scrape ice from the walls with pointed tools, the surface could be damaged.
Do not use high pressure appliances (e.g. steam generators).
1
Remove the product contained in the refrigerated compartment and place it immediately in a
suitable refrigerated container to ensure proper storage.
2
Turn off the equipment.
3
Wait at least 4 or 6 hours for any ice on the evaporator to melt
completely, before proceeding with cleaning of the appliance. It is advisable, in this regard,
to wait until the following day to make sure that the defrost has been fully performed.
Do not use mechanical devices or other means to accelerate the defrosting process other than
those recommended by the manufacturer.
4
Remove the manually removable accessories (e.g. slides, grids, bottom shelves,
ice-cream trays, etc.).
5
Remove the drain plug of the tank bottom (mod.
RS TB)
located below the bottom shelf)
to allow the water to flow into the dedicated tray located inside the base
with the equipment.
Proceed to also clean and disinfect the collection tray.
ATTENTION
Ensure
, for operation of the appliance,
correct and complete re-insertion of the drain
plug
after cleaning.
6
Clean the side walls and the bottom of the tank using a non-aggressive detergent, lukewarm water
and a non-abrasive cloth or sponge. Do not use sharp tools. Rinse thoroughly and dry with an
absorbent cloth.
7
Refit the accessories previously removed.
8
Switch on the appliance and allow the counter to cool down until it reaches
the desired temperature before reintroducing the food.
