25
C
HAPTER
10
X
MODEM
: U
PGRADING
THE
M
ICRO
RAPTOR
2.
Set the IP address on the management port.
a.
Execute the following command from the serial console.
F
OR
EXAMPLE
:
/etc/init.d/xinetd start
R
ESULT
:
The extended Internet service daemon has been started.
b.
Configure the IP address on the management port by executing the following command from
the serial console. This example uses 192.168.15.255 as the IP address we wish to assign, the
IP address should be on the same subnet as the IP address of the network port that will be
used by the host.
F
OR
EXAMPLE
:
ifconfig fm1-mac4 192.168.15.225 up
R
ESULT
:
192.168.15.225 is the IP address for management port.
3.
Connect your laptop to the management Ethernet port of the MicroRAPTOR.
