CHAPTER:
LOGIN AND MANAGEMENT,
SECTION:
MANAGEMENT
UM-G-iSG18GFP-4.5.06.1-EN.docx
© 2020 IS5 COMMUNICATIONS Inc. ALL RIGHTS RESERVED
- show running-config interface
<type> <port id>
-
show telnet-client
-
show ssh-client
7.10.3 Commands Description
Table 19 – Commands Description
Command
Description
set host-name
Set the switch name as shown in the root prompt. Default
name is “iSG18GFP”. Spaces are not supported.
set switch-host-name
Set the system host name and the SNMP name.
configurable 15-character string. Special characters
are supported except the symbol “!”.
set welcome-banner
Set the welcome banner as shown at log in screen.
default is “Welcome iS5customer”. If spaces are required,
place the complete title in double brackets.
ssh
The switch supports SSH client allowing It to open SSH
session to a remote partner.
User: username to be logged in at the remote partner.
Remote-ip: IP address of remote partner.
Config terminal
line vty
Set idle time out for telnet / ssh to the switch.
exec-timeout: given in seconds
default: 300 seconds
[no] cli
This command enables the console CLI through a serial
port. The no form of the command disables console CLI.
This command takes effect only on system restart.
[no] feature telnet
This command enables the telnet service in the system.
Application Connect
reload schedule date-and-
time
Set specific date and time for switch reload.
Time format:
YYYY-MM-DD,HH:MM:SS
configuration which was not committed will not be
available after reloading!
reload schedule every
Set time interval for cyclic automatic system reload.
Permissible range in
seconds
is
180 – 604800.
configuration which was not committed will not be
available after reloading!
