background image

iSC2 User

’s Manual 

 

 

 

 

iS5 Communications Inc. 

 

 

All Rights Reserved 

Dissemination  or  reproduction  of  this  document,  or  evaluation  and  communication  of  its  contents,  is  not 

authorized except where expressly permitted. Violations are liable for damages. All rights are reserved, particularly 

for the purposes of patent application or trademark registration. 

This document contains proprietary information, which is protected by copyright. All rights are reserved. No part 

of  this  document  may  be  photocopied,  reproduced  or  translated  to  another  language  without  the  prior  written 

consent of iS5 Communications Inc. 

 

 

Disclaimer Of Liability

 

We have checked the contents of this manual against the hardware and software described. However, deviations 

from the description cannot be completely ruled out. 

iS5  Communications  shall  not  be  liable  for  any  errors  or  omissions  contained  herein  or  for  consequential 

damages in connection with the furnishing, performance, or use of this material. 

The  information  given  in  this  document  is  reviewed  regularly  and  any  necessary  corrections  will  be  included  in 

subsequent  editions.  We  appreciate  any  suggested  improvements.  We  reserve  the  right  to  make  technical 

improvements without notice. 

 

 

Registered Trademarks

 

iS5Com™,  is  a  trademark  of  iS5  Communications  Inc.  Other  designations  in  this  manual  might  be  trademarks 

whose use by third parties for their own purposes would infringe the rights of the owner. 

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries. 

The  registered  trademark  Linux®  is  used  pursuant  to  a  sublicense  from  LMI,  the  exclusive  licensee  of  Linus 

Torvalds, owner of the mark on a world-wide basis. 

 

 

 

Third Party Copyrights

 

If any. All Rights Reserved. 

 

 

 

Warranty

 

Five (5) years from date of purchase, return to factory. For warranty details, visit 

www.iS5Com.com

 or contact your 

customer service representative

 

 

Содержание iSC2 Series

















Отзывы: