iES6 Series User’s Manual
iS5 Communications Inc.
35
Label
Description
port. Enter a number 1 to 200000000.
Priority (0-240)
Enter which port should be blocked by setting the priority on the LAN.
Enter a number between 0 and 240. The value of priority must be a multiple
of 16.
P2P
Some of the rapid state transactions that are possible within RSTP are
dependent upon whether the port concerned can only be connected to
one other bridge (i.e., It is served by a point-to-point LAN segment), or, it can
be connected to two or more bridges (i.e., It is served by a shared medium
LAN segment). This function allows the P2P status of the link to be
manipulated administratively. True means P2P is enabled. False means P2P
is disabled.
Edge
Admin Edge is the port which is directly connected to end stations. It cannot
create a bridging loop on the network. To configure the port as an edge port,
set the port to “
True
”.
Apply
Click “
Apply
” to activate the configurations.
NOTE:
Follow this rule to configure the MAX Age, Hello Time, and Forward Delay Time:
2 x (Forward Delay Time value –
1) ≥ Max Age value ≥ 2 x (Hello Time value +1)
RSTP Information
The RSTP algorithm result is as shown in the table below.
Figure 32 - RSTP Information Interface
