background image

 

 

17 

 

4.  Emergencies 

To facilitate the use of the modem, tracking and display of emergencies are provided. 

4.1.  Emergency 1 (incorrect input power supply) 

Emergency 1 occurs when the controlling internal voltage deviates from the permissible value. The modem 

stops  operating:  and  switches  off  GSM  module  power  supply.  Emergency  is  indicated  by  continuously  lit  red 

LED. The recovery is possible only when the controlling internal voltage is re-established. 

 

4.2.  Alarm 2 (incorrect module power supply) 

Emergency  2  occurs  when  GSM  module's'  power  supply  deviates  from  the  permissible  value.  The  

modem  stops  operating  and  switches  off  GSM  module  power  supply.  A  red  LED  signals  that  the  emergency 

has  occurred  (0.5s  on  /  0.5s  off).  The  recovery  is  possible  only  if  the  module  power  supply  is  re-established 

within  10  seconds  after  the  emergency  has  occurred.  If  within  10  seconds  the  module  power  supply  remains 

incorrect (with a correct input power supply), the modem goes into the waiting mode meaning that the modem’s 

power  supply  is  turned  off,  the  emergency  indication  is  preserved.  The  waiting  mode  can  be  terminated  only 

after the power is completely disconnected. 

 

4.3.  Emergency 3 (GSM module failed to run) 

Emergency  3  occurs  if  the  GSM  module  does  not  turn  on  or  is  absent.  A  red  LED  signal 

 (0.25s  on  /  0.25s  off  /  0.25s  on  /  1s  off)  turns  on  after  the  modem  precisely  detects  the  emergency  situation 

(~15 sec). The recovery is  possible only after a successful launch of the GSM module. After 10 unsuccessful 

attempts to launch the module, the modem goes into the waiting mode. 

The modem’s power supply is turned 

off,  the  emergency  indication  is  preserved.  The  waiting  mode  can  be  terminated  only  after  the  power  is 

completely disconnected. 

In case of repeated emergency, the modem should be serviced. 

Содержание TU31



















Отзывы: