iRZ TU31, Руководство по эксплуатации

Страница: 14 / 18

14
The <
P…
> characters indicate the control commands. To run a command, press the Enter key. If the
command is incorrect, the ERROR message is displayed. The command input is case-insensitive.
“
P1
” command will switch to statistics mode:
Statistics:
Power_Modem = XXX
Bad_Power_Modem = XXX
Power_Module = XXX
Bad_Power_Module = XXX
Reset = XXX
where:
Power_Modem
– the number of the modem actuations;
Bad_Power_Modem
– the number of power deviations of the modem;
Power_Module
– the number of times power GSM module's switched on;
Bad_Power_Modem
– the number of power deviations of the GSM module;
Reset
– the number of resets.
After displaying statistics, the modem will switch to Main Menu
“
P2
” command will switch to WD mode:
WD interwal,hh (WD OFF: hh=0, max: hh=255)
<Q> Quit
WD interval =