GSM router iRZ RUH
2
(HSUPA/HSDPA/UMTS/EDGE/GPRS) 3G
User manual
16
3. Connection and Settings
3.1. Router connection to the computer to set up
Before power supply insert the SIM card into the router. To do this you need to:
·
Get out SIM tray by pressing the eject button on the SIM tray (fig.2.5.1) by long, thin
object (straighten paper clip, toothpick, etc.);
·
Insert SIM card into the SIM tray;
·
Insert SIM tray with SIM card into the router so that the edges of SIM tray got into the
holder slots.
Do not apply physical effort when you insert the SIM card. If necessary, insert the second SIM
card.
Connect GSM antenna and power cable. Use straight-through cable for connection to the
switching unit or a crossover cable when connecting directly to your computer. Supply the router
with power unit.
After power supply the router begins loading and load indicator is on. After load indicator is
off, the router is ready for use.
3.2.
Basic Configuration
Web-based interface is used to configure the router and monitor its status. Source IP address is
192.168.1.1. Configuration can only be made by a user "root" with the initial password "root".
Web-interface top contains Status and log, Configuration and Administration tabs. Left part has
menu items for each tab.
3.2.1. Network Connection Settings
If the router iRZ RUH
2
3G is used for only one device Internet access, there is no need to
reconfigure the router network connection. You need only to configure the device properly: indicate
the IP address from the range of 192.168.1.2... 192.168.1.254, netmask 255.255.255.0 and default
gateway 192.168.1.1. You can also configure the device as DHCP-client. Then all these settings will
be received from the router automatically.
If the Internet connection is provided for the network, select such router settings to avoid
conflicts with the already connected devices. Consult your network administrator to obtain the
correct settings.
3.2.2. Access to web-interface
To configure the router, connect it directly to your computer using a crossover cable. Set
network connection properties "Automatically get IP address" in your computer. Enter 192.168.1.1
