Users Manual IRTrans Version 2.12
31
!
Learning
The IR Commands are controlled with the Dialog “View-I/R Config”. In the
Combobox “Labels” “Devices” should be selected first. Here the names for the
Devices Dialog in Homeseer IR Dialog in Homeseer
Devices are set. To keep the whole system simple, that names should not be
changed once commands have been learned. That means one should start
by selecting the names of the Devices. Now the Devices can be selected in
the “Labels” Combo box (e.g. TV). The Dialog now shows the Commands
together with their names. These names might be changed, too.
Using the “L” Button in front of every command the commands can be learned
now. Commands that already have a corresponding IR Command are marked
in red.
After clicking “L” a learn dialog with Remote and Command appears. By
clicking “Start Learn” the Learning process is activated. Now within 30s the
corresponding Button of the Remote Control has to be pressed. There is no
confirmation of the Learn Process but the learned Buttons will be marked in
Red in the IR Dialog. This is how Homeseer works when Learning IR
Commands.
The Commands are stored in the IRTrans Database as follows:
-
The Remote is called _hs_<Remotename>; for example _hs_TV
-
The command has the same name as the command in Homeseer
With the Button "T" (Test) the learned commands can be tested.
!
Using Homeseer with IRTrans
In the section View-Events new Events can be created. If "By IR Received" is
selected as command type, a Combo box with all learned IR Commands
appears. In this Combo box now a Command can be selected that triggers
this Event.
To send IR Commands in "Infrared Control" IR Commands can be selected to
be sent. It is possible to select more then one command here.
Users Manual IRTrans Version 2.12
32
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Peripherals Power Supplies used
with Class B Personal Computers:
We:
IRTrans GmbH
Located at:
Einsteinstraße 14, 85716 Unterschleißheim, Germany
Declare under sole responsibility that the product identified herein, complies with 47CFR
Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is
identical to the representative unit tested and found to be compliant with the standards.
Records maintained continue to reflect the equipment being produced can be expected to be
within the variation accepted, due to quantity production and testing on a statistical basis as
required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation. The above named party
is responsible for ensuring that the equipment complies with the standards of 47CFR
§§15.101 to 15.109.
Trade Name:
IRTrans IR Control System
Types or
Model Numbers:
IRTrans USB
IRTrans RS232
IRTrans Translator
IRTrans Busmodule
IRTrans Ethernet / IRDB
IRTrans Ethernet PoE / IRDB
IRTrans Mediacontroller
IRTrans LAN Controller
IRTrans LAN Controller XL
Signature of Party Responsible:
___________________
Printed name of Party Responsible:
Marcus Müller
Executed on (Date), at (Place):
03-09-05, Dortmund
