Users Manual IRTrans Version 2.12
27
Now the commands can be learned with Girder. When the IRTrans Plug-
in is selected in the Learn Combo box, the commands will be learned
through the IRTrans Dialog and stored in the IRTrans IR Database.
This procedure also starts by
selecting the name for the
Remote Control. The Plug-in
remembers the current
settings. They do not have to
be reentered for every
command.
Now a Timing for that
Remote Control is learned
and stored. Of course this
step is also needed only
once. If there is already a
Timing stored for that
Remote Control this step is
skipped automatically.
Users Manual IRTrans Version 2.12
28
Now a name for the
Command / Event can be
entered. This name is used
to store the command in the
IR Database. Then the Event
is handed over to Girder and
Stored as an Action.
While Learning via the
Girder Plug-in the Status and
Number of Timings and
Commands are displayed
continuously by the Plug-in.
When the Learning Procedure is canceled via „Cancel Learn“ the
irserver will be blocked until the selected Timeout expired. The
Standard Setting for that Timeout is 30s.
