Bracket Postioning for Lupin
Electrical Connection
3
This radiator is designed for connection to a ~230 V power supply with a
fixed socket. It comes with a connecting cable (A O5 VVF)
The cable must be connected to a junction box behind the radiator in
compliance with the applicable standards.
It is necessary to install an omnipolar cut-out, with a contact distance of
at least 3mm.
If the power cable gets damaged or needs to be changed, as a safety
precaution it must be replaced by the manufacturer, an authorised
after-sales service or a qualified Part P competent person.
You should have:
• 1 Towel Rail
• 4 Wall brackets (in parts)
Contents
2
You will need:
• Tape measure
• Electric drill and bits
• Spirit level
• Screwdrivers
• Allen Key
L
H*
W
mm mm mm
400 718 492
500 1210 984
600 1497 1271
-
1886 1640
= bracket positions
:
+
+
+
·
·
/
/¶
+
A brand of , Italy’s leading manufacturer of design led radiators.
Radiators Position
The positioning of the Lupin Electric must be chosen very carefully.
It must be installed correctly and in compliance with building and
electric regulations.
This towel rail is a registered
Class II, IP 44 heating panel,
which is protected against water
spray. It can be installed in zone 2,
provided that the controls are in
zone 3 and cannot be reached by
anyone using the bath or shower.
• It must not be installed in zone 1.
• Never earth it.
• An electrical plug must not be used.
• Do not install below a power socket. It must only be used indoors.
H* without electrical part
