-
18
MANUAL OPERATION
Manual operation allows you to perform a one-time watering function
without affecting the programmed watering plan. For example, you
might want to turn off sprinklers on a rainy day but have watering
resume normally after that. This section includes instructions for the
following manual operations:
RAIN
OFF
Use this feature to temporarily turn off watering, such as when it is
raining. As long as this feature is on, watering cycles cannot be activated
automatically.
l
Manual on and off
1. Set the dial to the Rain Off position.
l
Rain off
Stations currently watering will turn off after a 2-second delay.
l
Semi-automatic watering To return controller to normal operation, turn dial to Auto Run
position.
MANUAL ON
Use this feature to water one station for any amount of time regardless of
programming.
1. Set the dial to the Manual position.
2. Use the Advance A or Advance buttons to select
the station number.
3. Press the On A button.
The station will water until turned off or until midnight, whichever
comes first.
TURNING OFF MANUAL WATERING
1. Press the Off button, or move the dial out of Manual position.
MANUAL
OFF
Use this feature to turn shut off a station that is currently watering.
To turn off a manually “On” station:
1. Set the program switch to the desired program, A or B.
2. Set the dial to the Semi-Automatic position.
3. Press the Off button.
To turn off output to all stations:
1. Set the dial to the Rain Off position.
I
- CONTINUED
PROGRAMMABLE RAIN OFF
Use his feature to turn off watering cycles for a specific length of time,
from 1 to 7 days.
1. Set the dial to the Rain
Off
position.
2. Press the On A or Off buttons to select number of days to turn
off
(from 1 to 7).
3. Return dial to Auto Run position.
In the Auto Run position, the display shows the number of days off and
counts down. For example, “OFF7” = 7 days off; tomorrow will display
“OFF6.”
TO CANCEL PROGRAMMABLE RAIN OFF
1. Set dial to the Rain
Off
position.
2.
Press the On A or Off
buttons until display reads “OFF’
(no number).
3. Return dial to Auto Run position.
Manual Operation
