IRP U-SHAPE Series, Руководство пользователя

Страница: 17 / 38

Page 17
INSTALLATION INSTRUCTIONS
Remove packaging materials
Remove and dispose of/recycle packaging
materials. Remove tape and glue residue from
surfaces before turning on the air conditioner. To
remove residue: rub a small amount of liquid dish
soap over the adhesive with your fingers. Wipe with
warm water and dry.
Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the
surface of your air conditioner.
Handle air conditioner gently.
Prepare the Bracket
Remove the air conditioner, bracket and hardware
from the carton and set on a flat surface.
Pressing the Spring Push Pin, adjust the left
extension arm out and then install the right
extension arm.
Measure the width of the inner window sill on your
window. Making sure that the center of the bracket
will line up with the center of the window, adjust the
extension arms to the width just measured.
Note: the bracket will be offset to the left when
centered.
Apply bracket sealing foam strips to the bottom of
the bracket as shown.
Install Support Bracket
Install the main support bracket into the window
opening. Ensure that the horizontal bracket and
extension arms are located on the indoor side of
the window.
NOTE: Maintain control of the bracket until
installation is complete.