– If zone alarm is set to “on”, 1 “Beep” sound will be given every 6 seconds
when heart rate is below “Zone Low Limit” and 2 “Beep” sounds will be
given every 6 seconds when heart rate is above “Zone High Limit”. And
the displays will be as follow:
– Press S1 again to take split time, the taken split time will be shown for 10
seconds (with characters “CHR” flashing), and then the display will show
current running time of chronograph.
– Press S2 to stop the chronograph, then press S1 to re-start the chrono-
graph or press S2 to reset the chronograph back to zeros.
Remarks
1. If no heart rate signal is received for 1 minute, the link between the watch
and the transmitter will be cut off automatically, and “---” (not flashing)
will be shown at the top row of the display. To re-link, press S1, and “---”
will start flashing or heart rate will be shown.
%(/2:³=21(/2:/,0,7´
$%29(³=21(+,*+/,0,7´
5HR?ENPDF5HR
,&21
5HR?ENPDF5HR
61
2245_Bedienung_EN 25.5.2005 09:45 Uhr Seite 61
