4.2 The
function
STEP COUNTER
( Walk / Run Mode)
In this mode you can enlarge your step data on the display.
Basically you set your mode of movement here too:
- Walking ---> WALK
- Jogging ---> RUN
The switch-over is conducted by repeatedly pressing the NEXT button until WALK or RUN appears in the
upper part of the display. The switch-over from WALK to RUN and vice versa takes place in this display by
pressing and holding the NEXT button (approx. 3 seconds) until the corresponding text appears.
Independent of the indication WALK or RUN you can acquire following information on the display by
repeatedly pressing the NEXT button:
Steps + Movement timer >> Di Steps >> Ca Steps >> Speed + Steps
To delete accumulated daily data, press and hold the
ADJUST
button in this function for approx. 2 seconds
or as long as the words "HOLD CLEAR" are displayed.
Hereby all current day records will be deleted, but not the records that have already been stored in the
memory from the previous day.
Please note that:
- Some information (distance, kcal, speed) requires the input of your personal data. Please read the chapter
below, "User Data mode"
Movement timer
This timer shows you how long you have been in motion. That means as soon as the pedometer indicates a
movement, the timer starts running. This allows you to see how long it took you to make how many steps.
The resetting of this time is conducted together with the pedometer.
First steps
The pedometer does not start counting until the fifth step. This means if you take two steps and then sit
again for a while it won’t count anything. But if you stand up and walk for more than five steps it will begin
counting which means it begins at 6. So basically no steps are lost.
4.3. The
function
MEMORY (Memory Mode)
At midnight the PE108N always automatically stores, under that date (day and month), the following
accumulated daily information for the last 7 days:
- large display: Number of steps
- small display (alternating): Percentage of days target, kcal, distance
If the memory is empty "NO INFO" is displayed.
As soon as data is available it will be stored under the corresponding date. If there is daily data from more
than one day, you can use the NEXT button to “scroll” through the stored days.
Days without movement are also recorded. The content is then just “zero”.
You can delete recorded information by pressing and holding the
ADJUST
button for approx. 2 seconds or
as long as the words "HOLD CLEAR" are displayed. Please note: You can only delete all days together, not
select single days.
Содержание PE108N
Страница 1: ...PE108N User manual...
