Too close to household appliances (Computer, TV, video/audios, fax machines, speakers).
Near construction sites, traffic lights, roadside, neon lights etc.
Close to or on top of metal surfaces / plates.
Battery Installation
1. Lift the tab on the battery door located at the back of the clock.
2. Put in batteries with proper polarity (+) and (-).
3. Close the battery door.
Warning : Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel cadmium) batteries.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Do not touch any other button or setting on your unit. It will automatically receive the time signal
after batteries inserted.
Getting Started
As long as batteries are supplying power to the unit, it receives the time signal and adjusts the
time automatically. No manual adjustment is required after power up. Accurate adjustment of the
clock based on the time signal is supported within Europe.
If no reception after the power-up, we recommend to leave the clock overnight for searching the
time signal since night time allows better transmission of time signal.
Signal Receive Operation
The unit automatically receives the time signal everyday at midnight and thereby adjusts itself to
the exact time.
The WAVE OK indicator and the antenna tower icon appear on the display if the time signal is
successfully received or after manual pressed SET/WAVE button.
Important : Do not perform any button or switch operation while a signal receive operation is in
progress.
