Triggering a Receive Operation Manually
You can trigger a signal receive operation at any time by pressing the SET/WAVE button, which
cause the unit to perform an immediate signal receive operation.
Unsuccessful Signal Reception
If the automatic update is unsuccessful, the wave on top of the antenna tower and the WAVE OK
icon will be disappeared, and the unit will re-try to receive the signal again every hour thereafter
for maximum of 4 hours.
If unsuccessful signal reception after battery installation or after reset, the unit keeps trying for 10
minutes every 3 hours until time signal reception successful.
MANUAL CLOCK SETTING
To Set the Time Zone and Language
1. Press and hold the SET/WAVE button for couple of seconds. You then enter the TIME ZONE
and language set mode.
2. Press – key until your desired language shows on display.
3. Press + key to change the time zone until your desired time zone is shown on display.
To Set the Calendar
1. Press SET/WAVE button after TIME ZONE and language set mode.
2. Press + or – button sequentially to set the year.
3. Holding down or – button change the year at high speed.
4. Press SET/WAVE button to confirm the year and go to date set.
5. Press + or – button sequentially to set the date.
6. Holding down either + or – button change the date at high speed.
To Set the Time
1. Press SET/WAVE button after calendar set mode.
2. Press + or – button sequentially to set minutes, when you press the + or – button once, the
seconds count resets to 00.
3. Holding down either + or – button change the time at high speed.
To Set the Format
1. Press SET/WAVE button after desired time set and go to format set mode.
2. Press + button to toggle between 12hr and 24 hr time display format.
3. Press – button to toggle between °C and °F temperature display format.
4. Press SET/WAVE button to confirm and quit the set mode.
