IROX iClimber-DCX, Инструкция по эксплуатации

Страница: 24 / 36

23
Please note: During the display ‘PEER SEARCHING’ you can start the stopwatch
immediately with S/L (Chapter 4.3.1). The function PEER SEARCHING continues to
run in the background (however, the flashing icons are no longer displayed, only as
soon as a PEER has been found does the corresponding icon appear).
It is also possible if no stopwatch is active to enter the setting mode immediately with
the key EL2 (Chapter 4.3.2).
If a peer is recognised as available, the peer icon remains active in the display and
after the 15 seconds the text FOUND briefly appears (1 sec). If no known peer is
found, FOUND is not displayed.
The stopwatch display will then appear. In the assumption that the stopwatch is not
running and is ready at zero, the following display appears:
or
In both cases, the stopwatch function can be used as described below. The following
needs to be taken into account.
- The pulse is only displayed when a pulse belt (HEART PEER) is active.
- The display MEM FULL means that the memory of the data for transfer to the PC is
at least 95% full and further recordings will soon no longer be possible.